TETRA Teknolojik Sistemler A.Ş.

EQP-1 Manual Pellet Press

Obtaining truly representative results in RX or LIBS depends very much on the previous step, the manufacturing of the pellet. The Hydraulic Manual Pellet Press EQO-1 has been specially designed to achieve high quality pellets, homogeneous and stable. Able to apply pressure up to 20 tons, it is simple and safe to manage, and it occupies very little room in the laboratory.

The sample is placed in the chamber, specially designed for this purpose, then you lower the spindle and exert pressure progressively on the hydraulic lever until reaching the desired pressure – which you can control visually at all times with the analog gauge -. Once the level you wanted has been reached, the pressure is released through the pressure relief device, the plunger goes up and you can remove the pellet.

Method: pressure
Prospect: cement industry, metallurgical industry, material recovery companies, Geology and Mineralogy, ceramics
Maximum pressure: 0 to 20 t

AGENCIES

CONTACT US

Click for Contact form and Maps
ANKARA0312 472 63 63

6. Cadde (1322 Cadde) No:40 06450 Öveçler ANKARA

ankara@tetratek.com.tr
İSTANBUL0212 212 55 66

Mecidiye Mah. Bestekar Şevki Bey Sokak No:32 34335 Balmumcu - Beşiktaş / İSTANBUL

istanbul@tetratek.com.tr
İZMİR0232 239 79 49

Mansuroğlu Mah. 288/3 Sok. No:1 Selvili 2 Apt. A Blok K:1 D:2 BAYRAKLI -İZMİR

izmir@tetratek.com.tr
ADANA0322 459 97 82

Reşatbey Mah. Adalet Cad. 54/6 01200 ADANA

adana@tetratek.com.tr
GRUP FİRMALARIMIZ
 
#
Tamam